Welcome to the Irish Mini Owners Club Forum. Keep an eye out of on coming events!!!!

1981 Mini City 1000

This section is for Mini projects and restorations and also the place to show off your pride and joy.

Moderators: spud1979, The Marcos Graveyard, Moderators

ctwomey
NON Member
Posts: 314
Joined: Thu Jan 03, 2019 9:44 am
Whats your location?: Ballybrittas, Co. Laois
Region: Eastern
What Minis have you?: I owned a 1978 Mini 850 when I was in my late teens. I owned a 1986 Mini Chelsea that I imported from the UK. Also owned a 1982 MG Metro that was bored out to 1293. Restoring a 1981 Dublin Mini City.
Contact:

Re: 1981 Mini City 1000

Post by ctwomey »

Tacked in the floor patch panel against the tunnel.

Image

I have also tacked the side that will be butt welded

Image

M-machine panel didn't fit against the inner sill so I have made a relief cut and will put an additional patch in later.

Image

The flute in the M-machine panel is narrower than the original one so I have put in cuts that allows the flute to widen and reshape to the original floor.

Image

Image

Plug welds have gone really well using a 6.5mm hole and a 3mm hole in the back of the other panel

It's a day's work to get it this far, but if you rush it, it will not come out well.

Image


User avatar
colinf1
NON Member
Posts: 466
Joined: Mon Aug 24, 2020 10:27 am
Whats your location?: Dundalk
Region: Eastern
What Minis have you?: 1983 Mini City 1000
Contact:

Re: 1981 Mini City 1000

Post by colinf1 »

What's the thinking behind the 3mm hole on the lower panel? Seems like it would blow through fairly quickly, quicker than if it was just the 6.8mm hole on one side?

I was less technical with matching the flutes on the repair panels lol, bashed them into shape with hammer and dolly...
Image
ctwomey
NON Member
Posts: 314
Joined: Thu Jan 03, 2019 9:44 am
Whats your location?: Ballybrittas, Co. Laois
Region: Eastern
What Minis have you?: I owned a 1978 Mini 850 when I was in my late teens. I owned a 1986 Mini Chelsea that I imported from the UK. Also owned a 1982 MG Metro that was bored out to 1293. Restoring a 1981 Dublin Mini City.
Contact:

Re: 1981 Mini City 1000

Post by ctwomey »

Hi Colin,

The 3mm hole was used with the Cleco clips that I used to align the panel. It helped to always put the panel back into the same spot when doing all the measuring and cutting. I just drilled out one side to 6.5mm for the plug weld. If you use your normal thin sheet welding settings then you won't blow through the hole.
User avatar
colinf1
NON Member
Posts: 466
Joined: Mon Aug 24, 2020 10:27 am
Whats your location?: Dundalk
Region: Eastern
What Minis have you?: 1983 Mini City 1000
Contact:

Re: 1981 Mini City 1000

Post by colinf1 »

Ah I see now, I thought it was to ensure full penetration!
Image
User avatar
woody
IMOC Paid Member
Posts: 2831
Joined: Mon Feb 07, 2005 11:55 pm
Whats your location?: Drogheda
Region: Eastern
What Minis have you?: Traveller
Turbo
Hornet
Equinox
MINI Clubman
Location: LOUTH
Contact:

Re: 1981 Mini City 1000

Post by woody »

I was wondering the same thing about the holes. Personally I'm a hammer and dolly man myself, you'd be amazed what you can achieve with a bit of practice
TECHNICAL MODERATOR
ctwomey
NON Member
Posts: 314
Joined: Thu Jan 03, 2019 9:44 am
Whats your location?: Ballybrittas, Co. Laois
Region: Eastern
What Minis have you?: I owned a 1978 Mini 850 when I was in my late teens. I owned a 1986 Mini Chelsea that I imported from the UK. Also owned a 1982 MG Metro that was bored out to 1293. Restoring a 1981 Dublin Mini City.
Contact:

Re: 1981 Mini City 1000

Post by ctwomey »

Started welding up the tacked floor panel this evening

Image

Always easy to blend a butt weld when it's on an outside curve

Image

Finished up just after the first inside flute this evening

Image

Image

A splash of etch primer to keep it clean until I get to body prep

Image

I think I am going to run out of gas soon so will need to order another bottle of MIG gas
ctwomey
NON Member
Posts: 314
Joined: Thu Jan 03, 2019 9:44 am
Whats your location?: Ballybrittas, Co. Laois
Region: Eastern
What Minis have you?: I owned a 1978 Mini 850 when I was in my late teens. I owned a 1986 Mini Chelsea that I imported from the UK. Also owned a 1982 MG Metro that was bored out to 1293. Restoring a 1981 Dublin Mini City.
Contact:

Re: 1981 Mini City 1000

Post by ctwomey »

Latest updates on the mini

Image

Finishing off the floor of the passenger side.

Image

Image

Image

I might weld up the drainage holes like I have done else where.

Image

Image

I have a good bit of spare time between now and the end of the year so I am going to see what I can get done. Next up is the driver's side.

Image
User avatar
woody
IMOC Paid Member
Posts: 2831
Joined: Mon Feb 07, 2005 11:55 pm
Whats your location?: Drogheda
Region: Eastern
What Minis have you?: Traveller
Turbo
Hornet
Equinox
MINI Clubman
Location: LOUTH
Contact:

Re: 1981 Mini City 1000

Post by woody »

LOOKING GOOD
TECHNICAL MODERATOR
User avatar
colinf1
NON Member
Posts: 466
Joined: Mon Aug 24, 2020 10:27 am
Whats your location?: Dundalk
Region: Eastern
What Minis have you?: 1983 Mini City 1000
Contact:

Re: 1981 Mini City 1000

Post by colinf1 »

Great welding as usual, barely visible even in primer!

Should be ready for Sunday's show in Portlaoise?
Image
ctwomey
NON Member
Posts: 314
Joined: Thu Jan 03, 2019 9:44 am
Whats your location?: Ballybrittas, Co. Laois
Region: Eastern
What Minis have you?: I owned a 1978 Mini 850 when I was in my late teens. I owned a 1986 Mini Chelsea that I imported from the UK. Also owned a 1982 MG Metro that was bored out to 1293. Restoring a 1981 Dublin Mini City.
Contact:

Re: 1981 Mini City 1000

Post by ctwomey »

colinf1 wrote: Thu Oct 24, 2024 3:51 pm Should be ready for Sunday's show in Portlaoise?
Haha I wish.

I started the cleanup on the driver's side today.

I have discovered that HG rust remover is brilliant at cleaning up rusty panels. It contains Phosphoric Acid and when applied from a spray bottle 1:3 mix and agitated with a brush it removes the rust in minutes. Obviously, PPE required. I might use it on all the existing spot weld joints to kill off any hidden rust.

Image

Image
ctwomey
NON Member
Posts: 314
Joined: Thu Jan 03, 2019 9:44 am
Whats your location?: Ballybrittas, Co. Laois
Region: Eastern
What Minis have you?: I owned a 1978 Mini 850 when I was in my late teens. I owned a 1986 Mini Chelsea that I imported from the UK. Also owned a 1982 MG Metro that was bored out to 1293. Restoring a 1981 Dublin Mini City.
Contact:

Re: 1981 Mini City 1000

Post by ctwomey »

Slowly working the drivers side floor panel into place.

Image

Image
ctwomey
NON Member
Posts: 314
Joined: Thu Jan 03, 2019 9:44 am
Whats your location?: Ballybrittas, Co. Laois
Region: Eastern
What Minis have you?: I owned a 1978 Mini 850 when I was in my late teens. I owned a 1986 Mini Chelsea that I imported from the UK. Also owned a 1982 MG Metro that was bored out to 1293. Restoring a 1981 Dublin Mini City.
Contact:

Re: 1981 Mini City 1000

Post by ctwomey »

The garage has been a bit chilly the last few days. With a couple of hours here and there you can make progress. I do have a propane heater for it when it gets really cold. Anyway on with the work.

Final cut out of the floor

Image

Strengthening the corners of the M-machine panels before fitting

Image

Final weld thru primer before bracket welded on

Image

Starting to tack the repair floor panel into the floor. I work one side at a time to allow for expansion in as many directions as possible

Image

Working my way across the floor

Image

Image

The inner wing will be repaired afterwards. The blocks of wood are used to screw the self-taper screws which squeezes the panels together.

Image
Post Reply

Who is online

Users browsing this forum: Ahrefs [Bot], Google [Bot] and 0 guests